AZ2
FP12
FP20
HS1
NSP2
KT20
SLP2
SPN
ZWTM
ZWTMR
Standard Zipper 2-Pack
Foot Plug for 12′ Aluminum Poles
Foot Plug for 20′ Aluminum Poles
Replacement Head
Non-Skid Replacement Plate 2-Pack
20′ 2-Pack Aluminum Spring-Loaded Pole Kit
12′ 2-Pack Aluminum Spring-Loaded Pole Kit
FoamRail Span Adjustable Tapeless Seal, Adjusts from 4’3″ to 8′
Sticky Mat Starter Kit w/ 1 Base & 1 each 30-Sheet Pad (3/case)
Sticky Mat Refill w/ 4 each 30-Sheet Refill Pads (3/case)
 $16.00
 $4.50
 $6.75
 $11.00
 $19.00
 $292.00
 $168.00
 $67.00
 $59.00
 $ 49.00
AZ2
FP12
FP20
HS1
NSP2
KT20
SLP2
SPN
ZWTM
ZWTMR
Standard Zipper 2-Pack
Foot Plug for 12′ Aluminum Poles
Foot Plug for 20′ Aluminum Poles
Replacement Head
Non-Skid Replacement Plate 2-Pack
20′ 2-Pack Aluminum Spring-Loaded Pole Kit
12′ 2-Pack Aluminum Spring-Loaded Pole Kit
FoamRail Span Adjustable Tapeless Seal, Adjusts from 4’3″ to 8′
Sticky Mat Starter Kit w/ 1 Base & 1 each 30-Sheet Pad (3/case)
Sticky Mat Refill w/ 4 each 30-Sheet Refill Pads (3/case)
 $16.00
 $4.50
 $6.75
 $11.00
 $19.00
 $292.00
 $168.00
 $67.00
 $59.00
 $ 49.00
AZ2 Standard Zipper 2-Pack  $16.00
FP12 Foot Plug for 12′ Aluminum Poles  $4.50
FP20 Foot Plug for 20′ Aluminum Poles  $6.75
HS1 Replacement Head  $11.00
NSP2 Non-Skid Replacement Plate 2-Pack   $19.00
KT20 20′ 2-Pack Aluminum Spring-Loaded Pole Kit   $292.00
SLP2 12′ 2-Pack Aluminum Spring-Loaded Pole Kit  $168.00
SPN FoamRail Span Adjustable Tapeless Seal, Adjusts from 4’3″ to 8′   $67.00
ZWTM Sticky Mat Starter Kit w/ 1 Base & 1 each 30-Sheet Pad (3/case)   $59.00
ZWTMR Sticky Mat Refill w/ 4 each 30-Sheet Refill Pads (3/case)  $49.00

Product Information

<br>

 

 
 

AZ2, Two ZipWall® standard zippers create a hands-free entry – simply roll up the flap and hold the door open using two flap hooks. This hands-free door can be as wide as needed to get equipment and supplies in and out of the worksite.

Contents: Two zippers and two flap hooks. ZipperKnife™ sheeting cutter does not come with or work with this zipper.

Create an entry in a plastic Barrier in Seconds

Self-adhesive zippers attach to plastic sheeting and create an entry in a plastic dust barrier wherever you need it. Flap hooks hold entryway open for easy access. Includes two zippers and two flap hooks.

Note: The patented ZipperKnife™ does not come with nor works with this product.

 

 

 

FP12 and FP20, Replacement foot plug for ZipWall® 12′ & 20′ pole.

HS1, Single replacement head. High-impact material designed for heavy use. Fits all ZipWall® dust barrier poles. Interchangeable with SMH1.

Snap the head onto a ZipWall® dust barrier pole.

 

 

The tallest pro dust barrier pole – Indispensable for high ceilings, great for smaller jobs too!

Two spring-loaded poles secure a dust barrier up to 20 feet high and 10 feet long. Strong and lightweight anodized aluminum construction. Innovative non-skid, non-marking head and plate. Package includes two poles with parts (heads, plates, and GripDisk™ non-slip pads).

 

Quick & easy to set up — no ladders, no tape, no damage.

KT20, 20′ 2-Pack Aluminum Spring-Loaded Pole Kit

ZipWall® 20 dust barrier poles are designed for the professional contractor. Two anodized aluminum sections telescope up to 20 feet and twist to lock. Each spring-loaded pole is easy to set up without a ladder – a major safety benefit when working with high ceilings. The innovative non-skid, non-marking head locks the barrier material, allowing it to be raised with the pole, and holds it securely in place without damaging the ceiling. A tight dust barrier can be set up in just a few minutes, one pole at a time, without ladders, tape, or damage.

The ZipWall® 20 poles are the tallest dust barrier poles. Anodized aluminum construction makes them sturdier than stainless steel, smoother to raise and to lock, and the best foundation for ZipWall® accessories like FoamRail™ tapeless seals. These poles are versatile – extending from 5’2″ to 20′ – and built for heavy use.

A 12 foot anodized aluminum pole is also available.

The ZipWall® 20 2-Pack is essential for jobs with high ceilings, and a great add-on to your existing set of ZipWall® dust barrier poles. Two poles can be used to create a barrier up to 10 feet wide, or close off a hallway less than 10 feet wide.

Key features

  • Spring-loaded design for quick, easy, and safe setup
  • Strong and lightweight anodized aluminum construction
  • Telescope up to 20′ (from 5′ 2″)
  • Innovative non-skid, non-marking head and plate
  • Each pole weighs just 3.25 lb
  • GripDisks™ prevent sliding on smooth floors
  • Work with positive and negative air
  • Help comply with the EPA RRP rule

Contents Two 20′ anodized aluminum spring-loaded poles with parts (heads, plates, and GripDisk™ non-slip pads). Plastic sheeting is not included.

Shipping Information
Weight: 7.8 lb
Dimensions: 62.5″ x 3.75″ x 2.75″

Applications for ZipWall dust barrier poles

The ZipWall® dust barrier is used for dust protection in remodeling, renovation, restoration, painting, drywall, flooring, demolition, concrete cutting, sanding, and any interior job that generates dust. Beyond construction, the ZipWall® barrier system is widely used for abatement, mold remediation, water damage or flood restoration, and other interior jobs where contaminants in the dust are a concern. Another driver for the use of ZipWall® barriers is OSHA’s new Silica Rule for Construction which requires the implementation of dust controls.

Heavy users of ZipWall® products include professional contractors – general contractors and tradesmen – and facility managers. ZipWall® barriers can be found in healthcare facilities, hospitality and retail spaces, manufacturing, government and education buildings, transportation and property management buildings, and of course, in the residential market where the ZipWall® system originated.

 

SLP2, ZipWall® 12 spring-loaded dust barrier poles are designed for the professional contractor. They are easy to use, easy to store, and a significant time saver! These poles are strong and lightweight, telescope up to 12 feet high and twist to lock. Each spring-loaded pole takes seconds to set up without a ladder. The innovative non-skid, non-marking head locks the barrier material, allowing it to be raised with the pole, and holds it securely in place without damaging the ceiling. A tight dust barrier can be set up in just a few minutes, one pole at a time, without ladders, tape, or damage.

The ZipWall® 12 poles are the prime ZipWall® poles. Anodized aluminum construction makes them sturdier than stainless steel, smoother to raise and to lock, and the best foundation for ZipWall® accessories like FoamRail™ tapeless seals. These poles are built for heavy use and their size is perfect for both residential and commercial jobs.

A 20 foot anodized aluminum pole is also available.

The 2-Pack is ideal for adding to your ZipWall® Dust Barrier System. Two poles can also be used to close off a hallway or small room less than 10 feet wide.

Key features

  • Spring-loaded design for quick, easy, and safe setup
  • Strong and lightweight anodized aluminum construction
  • Telescope up to 12′ (from 4′ 7″)
  • Innovative non-skid, non-marking head and plate
  • Each pole weighs just 2 lb
  • GripDisks™ prevent sliding on smooth floors
  • Work with positive and negative air
  • Help comply with the EPA RRP rule

Contents Two 12′ anodized aluminum spring-loaded poles with parts (heads, plates, and GripDisk™ non-slip pads). Plastic sheeting is not included.

Shipping Information
Weight: 5.0 lb
Dimensions: 58.75″ x 3.5″ x 2.25″

 

Applications for ZipWall dust barrier poles

The ZipWall® dust barrier is used for dust protection in remodeling, renovation, restoration, painting, drywall, flooring, demolition, concrete cutting, sanding, and any interior job that generates dust. Beyond construction, the ZipWall® barrier system is widely used for abatement, mold remediation, water damage or flood restoration, and other interior jobs where contaminants in the dust are a concern. Another driver for the use of ZipWall® barriers is OSHA’s new Silica Rule for Construction which requires the implementation of dust controls.

Heavy users of ZipWall® products include professional contractors – general contractors and tradesmen – and facility managers. ZipWall® barriers can be found in healthcare facilities, hospitality and retail spaces, manufacturing, government and education buildings, transportation and property management buildings, and of course, in the residential market where the ZipWall® system originated.

 

Product Information


Tightly seals a dust barrier without tape in seconds

SPN, This FoamRail™ seal attaches to any ZipWall® pole and tightly seals a barrier along the ceiling, floor, or wall. It extends from 4 feet 3 inches to 8 feet and easily adjusts to fit the job. Requires no ladders or tape and leaves no damage.

Seals up to 8 feet with one pole.

To seal a barrier tightly at the ceiling, just snap the Span™ onto any ZipWall® pole,  and raise the pole to press the plastic – or ZipFast™ panels – firmly against the ceiling. Use it with a Floor Adaptor to seal tightly at the floor.

Or use it with a SideBridge™ Wall Mount to seal along a wall.

The Span™ can seal up to 8 feet with one pole. It easily adjusts to fit, extending from 4 feet 3 inches up to 8 feet.

FoamRail™ tapeless seals prevent dust from escaping the work area during remodeling, renovation and repair. Unlike tape, the FoamRail™ product line is reusable and provides a robust dust control solution that will stay up. It can be used with negative or positive air, and is especially useful for construction work in locations like health care facilities, restaurants, retail space, office buildings, and any occupied residential or commercial property.

Key features:

  • Seals a dust barrier without tape in seconds
  • Requires no ladders and leaves no damage
  • Extends from 4 feet 3 inches to 8 feet
  • Aluminum construction with compressible foam
  • Reusable and cost-effective
  • Can be used with negative or positive air
  • Works with all ZipWall® poles
  • A great alternative for tape when tight sealing is required

Contents: One adjustable tapeless seal.

 

 

ZWTM, Sticky Mat Starter Kit w/ 1 Base & 1 each 30-Sheet Pad (3/case)

 

Prevent tracking dust in and out of the work area!

This 4-pack refill works with the ZipWall® Mat base. It contains four pads of 24″×36″ clear adhesive sheets, individually tabbed and numbered.

The adhesive surface captures dust on contact – simply peel away the top sheet to expose a new surface!

 

Prevent tracking dust in and out of the work area!

This 4-pack refill works with the ZipWall® Mat base. It contains four pads of 24″×36″ clear adhesive sheets, individually tabbed and numbered.

The adhesive surface captures dust on contact – simply peel away the top sheet to expose a new surface!

Each ZipWall Mat refill includes four pads of 24″×36″ clear adhesive sheets for use with the ZipWall® Mat base. The sheets are individually tabbed, making them easy to peel off, and numbered so you always know how many are left. When the top sheet gets dirty, simply peel it off to expose a clean one. The adhesive surface captures dust on contact and prevents tracking it in and out of the work area.

See ZipWall® Mat Starter Kit for information about the base.

The EPA recommends the use of tacky mats to help comply with its Lead Renovation, Repair and Painting Rule (RRP Rule), which requires that renovation firms use precautions to ensure that all personnel, tools, and other items are free of dust and debris before leaving the work area. According to the EPA Inspection Manual for the RRP Rule, “tacky mats may be put down immediately adjacent to the plastic sheeting covering the work area floor to remove dust and debris from the bottom of the workers’ shoes as they leave the work area.”

Key features:

  • For use with the ZipWall® Mat Starter Kit
  • Clear disposable adhesive sheets are individually tabbed and numbered – simply peel away the top sheet to expose a new surface
  • Large adhesive surface removes dust from shoes, casters, and wheels

Contents: Four 30-sheet refill pads.